Casio IT-800 Series Software Manual page 229

Step 2: Set the SIM lock disable using the WAN Settings tool
1. Dismount the check from the Enable SIM Lock. If the SIM lock mode is set effect, reset the
PIN lock by inputting the correct PIN code in Security tab. The SIM lock mode is reset.
2. If the current SIM lock status shows "UnLock" in State field (see
necessary to reset the PIN lock because the PIN lock function is not used.
Figure 3-90
3. If the current SIM lock status shows "PIN" in State field (see
reset the PIN lock. Input the correct PIN code in Enter PINCODE edit box and tap Unlock
button. After entering the correct PIN code, the SIM lock status will show "UnLock" in State
field indicating the PIN lock state is reset.
Figure 3-91
Note:
The limited number of inputting your PIN code is indicated underneath Enter PINCODE edit
box (see F igure 3.91). In any case your PIN code entry exceeds over this limitation, the PIN
4
status changes to "PUK". This indicates you need to contact your SIM card supplier to obtain
PUK code. While you are entering PIN code, pay your attention not to exceed the limitation.
229
F igure 3.90), it is not
4
F igure 3.91), it is necessary to
4