System Tab
This tab is to set a period of time for the APO (Automatic Power OFF) function to activate and
"Enable" or "Disable" for turning on the power on the terminal with the Trigger key.
Figure 3-44
Scanner APO
This filed is to set a period of time in the range of 0 to 1800 (in second) for the APO function to
activate. Setting "0" will disable the function.
Power up device with trigger key
This checkbox is to set "Turning on the power of the terminal with the Trigger key" effect. With a
check mark in the checkbox, the power on the terminal can be turned on when one of the Trigger
keys is pressed down.
193