Casio IT-800 Series Software Manual page 35

2.2 Laser Scanner
This chapter describes about detailed specifications of the integrated Laser Scanner (model
dependant).
2.2.1 Basic Specifications
The following industrial standard bar code symbologies are supported by the integrated Laser
Scanner.
Table 2.26 Supported symbologies
Symbology
EAN, UPC-A, UPC-B
EAN, UPC-A, UPC-B Addon
UPC-E
UPC-E Addon
Code39
NW7
Interleaved 2of5
Industrial 2of5
Code93
Code128
MSI
IATA
GS1 DataBar Omnidirectional
GS1 DataBar Limited
GS1 DataBar Expanded
GS1 DataBar Stacked
GS1 DataBar Expanded Stacked
Notes:
1. MSI check digit
One of the following MSI check digit calculation methods can be selected.
- 1 digit, mod10
- 2 digit, mod10/mode11
- 2 digit, mod10/mod10
2. IATA check digit
One of the following IATA check digit calculation methods can be selected.
- Calculate number other than end 1 digit
- Calculate coupon number and numeric value segment
- Calculate numeric value segment
- mod10
3. Minimum digit on Code39 symbology
The no. of minimum digits can be set to one digit only when scanning Code39 symbology is
enabled.
Check Digit Calculation
Enable or Disable
Enable or Disable
Enable or Disable
Enable or Disable
Enable or Disable
Enable or Disable
Enable or Disable
Enable or Disable
Enable or Disable
Enable or Disable
Enable or Disable (Note 1)
Enable or Disable (Note 2)
Enable
Enable
Enable
Enable
Enable
35
No. of min.
No. of max. digits
digits
8 (fixed) 13 (fixed)
10 (fixed) 18 (fixed)
7 (fixed) 7 (fixed)
9 (fixed) 12 (fixed)
2 (Note 3) 52
2 (Note 4) 63
4 (Note 5) 94
2 67
1 70
1 98
1 57
1 (Note 6) 65 (Note 6)
14 (fixed) 14 (fixed)
14 (fixed) 14 (fixed)
1 74 (Note 7)
14 (fixed) 14 (fixed)
1 74 (Note 7)