Casio IT-800 Series Software Manual page 93

[Auto Power OFF] Section
Auto Power OFF
[Indicator] Section
LED
Buzzer
Vibrator
[Decode Window] Section
Enable
Left
Top
Right
Bottom
[Decode Reverse] Section
Enable
Imager's APO timer
Specify turning on the LED when
scanning is complete.
Specify turning on the buzzer when
scanning is complete.
Specify turning on the vibrator when
scanning is complete.
Specify decode window mode.
Specify left side coordinate of
decode window.
Specify top side coordinate of
decode window.
Specify right side coordinate of
decode window.
Specify bottom side coordinate of
decode window.
Specify decode reverse mode
93
Specify in the range of 0
0 to 1800 (in second),
"0" disables APO, "1
to 1800" turns off the
power to the Imager
after the time period
has elapsed.
0; disable, 1; enable in 2
green, 2; enable
"success" in green and
"failure" in red
0; disable, 1; enable 1
0; disable, 1; enable 1
0; disable, 1; mode 1, 0
2; mode 2, 16; user
define
Specify from 0 to 751 0
Specify from 0 to 479 0
Specify from 0 to 751 751
Specify from 0 to 479 479
0; No reverse 0
1; Reverse
2; Both