Casio IT-800 Series Software Manual page 203

3.24 Scanner Setting
This applet is to change the settings for the integrated Laser Scanner (model dependant). For detail
about each parameter, refer to Chapter
Read barcode Tab
This tab is for specifying bar code symbologies to scan. Multiple bar code symbologies can be
specified.
Figure 3-58
Driver Mode Tab
This tab is to set "Enable" or "Disable" for scanning each bar code symbology of the symbologies
listed in Read barcode tab and its parameters listed below.
- Min (No. of minimum readable digits)
- Max (No. of maximum readable digits)
- Output format
- Check-digit
- Check-digit output
Figure 3-59
2 .2 " L aser Scanner".
4 4
203