Casio IT-800 Series Software Manual page 155

2.12.8 Virtual OFF by System
The virtual off function by system is not supported by the terminal.
2.12.9 Charging/Supplying the Power
The optional Dual Battery Charger (HA-D32DCHG) can be used to charge battery packs (two at a
time). Mounting the terminal on USB Cradle (HA-H60IO), Cradle-type Battery Charger
(HA-H30CHG), or Ethernet Cradle (HA-H62IO) allows charging the battery pack while it is
installed in the terminal and supplying the power to the terminal.
2.12.10 Temperature Control
If temperature rise is detected in the terminal when running at the highest clock frequency (under
such the condition that the CPU speed at "TURBO", the integrated WLAN module in active mode,
etc.), a warning message (see
integrated devices in the terminal.
Figure 2-18
Either turn off the power and leave the terminal unused for a while or move the terminal to a
location where the surrounding air temperature is cooler.
If the power is turned off due to the temperature limit, a warning message (see
appears when the power is turned on a next time.
Figure 2-19
F igure 2.16) appears and the power is turned off to protect the
3
155
F igure 2.17)
3