Casio IT-800 Series Software Manual page 123

2.9.5 Channels
The no. of WLAN channels set by default at the factory is "1CH-13CH" (13 channels) compatible
with the ETSI standard (EU radio standard).
2.9.6 WLAN Setting with Configuration File
The configuration file can be used to set the default values for the WLAN settings. By loading the
configuration file into the terminal, setting to configure the WLAN operations can be easy.
• The configuration file is "\Documents and Settings\System Settings\WLANCFG.ini".
• If no configuration file is available, WLAN operation is initiated with the default settings.
Timing to Load the File
The timing for loading the configuration file is when a reset or a full reset is performed on the
terminal. However, if any one of the following cases occurs, setting with the default values in the
configuration file will not take place.
• The file itself does not exist.
• The format is wrong.
• "Disable configuration file" has been set in the WLANCFG parameter.
Creating Configuration File
The configuration file can be created and edited with WLAN Settings tool at the Control Panel.
Using a general editor, a configuration file can be also created.
WEP key must be created in advance with an encrypted character string using the WLAN
Setting tool and then copy and paste it to the configuration file. WLAN settings made with
Microsoft's WLAN setting will be ignored in the configuration file.
123