Casio IT-800 Series Software Manual page 25

2.1.6 Buzzer Sound
Basic Specifications
The buzzer sound in various modes such as scanning confirmation, alarm, warning, and other
available sounds can be output via the integrated speaker. The sounds have four attributes and
default values.
Table 2.13
Sound Mode
Alarm
Warning
Scan end
User designated
Setting Volume
The "Buzzer" at the Control Panel can be used to set up volume in three grades from loud,
medium, low and ON/OFF of mute. Setting the volume is also possible using the System Library
in application.
The functions of the System Library relevant to the Setting Volume are as follows.
SysPlayBuzzer
SysStopBuzzer
SysSetBuzzerVolume
SysGetBuzzerVolume : Retrieves sound volume of the buzzer.
SysSetBuzzerMute
SysGetBuzzerMute
Time
Frequency (Hz)
(millisecond)
3500 150
3000 100
3300
--
: Sounds the buzzer.
: Turns off the buzzer's sound.
: Sets up sound volume of the buzzer.
: Sets up sound volumes for all the parameters and individual mutes.
: Retrieves the statuses of all the sound volumes and individual mutes.
25
Individual Mute
ON or OFF
ON or OFF
75 ON or OFF
-- ON or OFF
Attribute
B_ALARM
B_WARNING
B_SCANEND
B_USERDEF