Boot - Vecow MTC-6000 User Manual

Set User Password
Set HDD user password.
*** Advisable to power cycle system after setting hard disk passwords ***.
Discard or save changes option in setup does not have any impact on HDD
when password is set or removed. If the 'Set HDD User Password' option is
gray, do power cycle to enable the option again.

4.6 Boot

Setup Prompt Timeout
Number of seconds to wait for setup activation key. 65535(0xFFFF) means
indefinite waiting.
Bootup NumLock State
Select the keyboard NumLock state.
Quiet Boot
Enables or disables Quiet Boot option.
Boot Option #x
Sets the system boot order.
New Boot Option Policy
Controls the placement of newly detected UEFI boot options.
Hard Drive BBS Priorities
Set the order of the Legacy devices in this group.
©Vecow MTC-6000 User Manual
Figure 4-6 : BIOS Boot Menu
BIOS SETUP 93