Intel core i7/i5/i3 soc whiskey lake ultra-compact fanless embedded system, 2 gige lan, 4 10g usb 3.1 gen 2, 2 com, 9v to 48v, ignition control, -40 degrees c to 85 degrees c (109 pages)
This manual is released by Vecow Co., Ltd. for reference purpose only. All product offerings and specifications are subject to change without prior notice. It does not represent commitment of Vecow Co., Ltd. Vecow shall not be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of the product or documentation, nor for any infringements upon the rights of third parties, which may result from such use.
Page 4
Order Information Part Number Description MTC-4015- 15" Fanless Multi-Touch Computer, 6 GbE LAN with 4 PoE , 2 SSD ® PoER650U Tray, 2 SIM, 4 COM, 5 USB, Isolated DIO, Onboard Intel Core™ i7-5650U MTC-4015- 15" Fanless Multi-Touch Computer, 6 GbE LAN with 4 PoE , 2 SSD ®...
Optional Accessories Part Number Description DDR3L8G Certified DDR3L-1600 8G RAM DDR3L4G Certified DDR3L-1600 4G RAM PWA-120W 120W, 24V, 90VAC to 264VAC Power Adapter with 3-pin Terminal Block PWA-120WM4P 120W, 24V, 90VAC to 264VAC Power Adapter with 4-pin Mini- DIN Connector PWA-160W-WT 160W, 24V, 85VAC to 264VAC Power Adapter with 3-pin Terminal Block, Wide Temperature -30°C to +70°C...
1.5.1 Dimensions of MTC-4015-PoER 1.5.2 Dimensions of MTC-4015-2R 1.5.3 Dimensions of MTC-4015P-PoER 1.5.4 Dimensions of MTC-4015P-2R CHAPTER 2 GETTING TO KNOW YOUR MTC-4015 2.1 Packing List 2.2 I/O Functions 2.3 Rear Panel I/O and Functions 2.4 Main Board Expansion Connectors 2.5 Main Board Jumper Settings...
Page 7
CHAPTER 4 BIOS AND DRIVER 4.1 BIOS Settings 4.2 Main Menu 4.3 Advanced Function 4.4 Chipset Function 4.5 Boot Function 4.6 Save & Exit APPENDIX A : GPIO and WDT Functions A.1 Function Description A.2 Entry Functions...
GENERAL INTRODUCTION 1.1 Overview Vecow MTC-4015 Series Fanless Multi-Touch Computer is a 15 inch all-in- one fanless Multi-Touch Computer for Internet of Thing (IoT) and/ or Industry 4.0 applications with excellent performance and trusted reliability. Powered by ® 5th generation Intel Core™...
• External CFast Socket, 2 SSD Tray, 4 COM, 2 USB 3.0, 3 USB 2.0 • 16 Isolated DIO, Ignition Control • Touchscreen works with gloves • IP65 Front Panel Protection (Optional) 1.3 Product Specification 1.3.1 Specifications of MTC-4015-PoER Panel Panel Type TFT LCD Active Area 15”...
Page 10
Audio Realtek ALC892, 5.1 Channel HD Audio OS Support Windows 8, Windows 7, Linux I/O Interface Serial 4 COM RS-232/ 422/ 485 • 2 External USB 3.0 • 3 External USB 2.0 16 Isolated DIO : 8DI, 8DO ® • LAN 1 : Intel I218 Gigabit LAN supports iAMT ®...
• 20G, Half-sine, 11ms Vibration • IEC 60068-2-64 • Non-operation : 10Hz to 200Hz, 1.5Grms, X, Y, Z, 30 mins each Axis CE, FCC 1.3.2 Specifications of MTC-4015-2R Panel Panel Type TFT LCD Active Area 15” (4 : 3) Max Resolution...
Page 12
Touch Screen Touch Screen Type 20-point Projected Capacitive = > Transparency Surface Hardness 7H Surface Hardness Control Interface USB Interface System ® Processor Intel Core™ i7-5650U/ i5-5350U/ i3-5010U Processor (Broadwell-U) ® Chipset Intel Memory 2 DDR3L 1333/ 1600 MHz SO-DIMM, up to 16GB ®...
1.4 Supported CPU List CPU Name Cache Max. Frequency Embedded i7-5557U Up to 3.40 GHz i7-5650U Up to 3.20 GHz i7-5600U Up to 3.20 GHz i7-5550U Up to 3.00 GHz i7-5500U Up to 3.00 GHz i5-5287U Up to 3.30 GHz i5-5257U Up to 3.10 GHz i5-5350U...
2.1 Packing List Item Description MTC-4015, 15” Fanless Multi-Touch Computer (According to the configuration you order, the MTC-4015 series may contain SSD/HDD and DDR3L SO-DIMM. Please do verify these items if possible.) Accessory box, it contains ● Vecow Drivers & Utilities DVD ●...
USB 2.0 RESET CFast POWER It is a hardware reset switch. Use this switch to reset the system without power off the MTC-4015. Press the Reset Switch for a few seconds, then reset will be enabled. 2.2.2 Power Button LAN1 LAN2...
Page 19
It is implemented by a SATA II Port from Broadwell-U PCH. Be sure to disconnect the power source and unscrew the CFast socket cover before installing a CFast card. The MTC-4015 does not support the CFast hot swap and PnP (Plug and Play) functions. It is necessary to remove power source first before inserting or removing the CFast card.
Page 20
1920 x 1080 resolutions. 2.2.6 DisplayPort LAN1 LAN2 DVI-D SIM 1 SIM 2 USB 3.0 USB 2.0 RESET CFast POWER Onboard DisplayPort connection supports up to 3840 x 2160 resolutions at 60 Hz. GETTING TO KNOW YOUR MTC-4015...
Page 21
There are 2 USB 3.0 connections available supporting up to 5GB per second data rate in the front side of MTC-4015. They also comply with the requirements of SuperSpeed (SS), High Speed (HS), Full Speed (FS) and Low Speed (LS).
Page 22
POWER There are 2 8-pin RJ-45 jacks supporting 10/ 100/1000 Mbps Ethernet ® connections in the front side of MTC-4015. LAN 1 is powered by Intel 218LM Ethernet engine; LAN 2 is powered by Intel I210 Ethernet engine. When both LAN 1 and LAN 2 work in normal status, basic iAMT function is enabled.
On | Off LAN4 LAN6 LAN3 LAN5 MTC-4015 supports 6V to 36V DC power input by terminal block in the rear side. In normal power operation, power LED lightens in solid green. MTC-4015 supports up to 80V surge protection. Pin No. Definition Earth GND 2.3.2 Remote Power On/ Off Switch...
Page 24
OUTPUT 4 INPUT 5 OUTPUT 5 INPUT 6 OUTPUT 6 INPUT 7 OUTPUT 7 DI_COM DIO_GND DIO_GND External 24~78VDC Input GPI SINK Mode Isolated GPI input circuit in SINK mode (NPN) is illustrated as follow : GETTING TO KNOW YOUR MTC-4015...
LAN6 LAN3 LAN5 There are 4 RJ45 connectors in the rear side of MTC-4015. It supports IEEE 802.3at (PoE ) Power over Ethernet (PoE) connection delivering up to 25.5W/ 48V per port and 1000BASE-T gigabit data signals over standard Ethernet Cat 5/ Cat 6 cable.
2.4 Main Board Expansion Connectors 2.4.1 Front View of MTC-4015 Main Board With Connector Location BIOS CN15 CN17 CN16 CN19 Battery CON1 CN18 JP10 JP11 2.4.2 Rear View of MTC-4015 Main Board With Connector Location PLX-8608 GETTING TO KNOW YOUR MTC-4015...
Page 30
2.4.4 CON1, J2 LVDS CON1 MTC-4015 supports dual-channel 24-bit LVDS display, up to 1920 x 1200 pixels resolution. The pin assignments of CON1 are listed in the following table: Pin No. Definition Pin No. Definition Pin No. Definition PANEL_VDD TXO0-...
Page 31
CN17 CN19 There are 2 onboard high performance Serial ATA III (SATA III) on MTC-4015. It supports higher storage capacity with less cabling effort and smaller required space. The pin assignments of CN17 and CN19 are listed in the following table: Pin No.
Page 32
2.4.6 J1, J3 : SATA Power Connector The MTC-4015 also equip with 2 SATA power connector. It supports 5V (Up to 2A) and 12V (Up to 1A) current to the hard drive or SSD. The pin assignments of J1 and J3 are listed in the following table: Pin No.
Page 33
2.4.7 J4 : Internal USB The MTC-4015 main board provide one expansion USB port using plug-and- play for Dongle Key or LCD touch Panel. The USB interface supports 480 Mbps transfer rate which comply with high speed USB specification Rev. 2.0.
Page 34
1. When a Mini PCIe device is inserted, its Pin-43 forces the respective pin on the socket to ground, or logic 0. MTC-4015 using JP11 Pin-43 status designed for switching between mSATA drive and Mini PCIe device.
Page 36
The pin assignments of CN16 are listed in the following table: Pin No. Signal Name Pin No. Signal Name WAKE# +3.3Vaux Reserved Reserved +1.5V CLKREQ# UIM_PWR UIM_DATA REFCLK- UIM_CLK REFCLK+ UIM_RESET UIM_VPP Mechanical Key Reserved Reserved reserved PERST# PERn0 +3.3Vaux PERp0 +1.5V GETTING TO KNOW YOUR MTC-4015...
Page 37
2.4.10 Battery Battery The MTC-4015’s real-time clock is powered by a lithium battery. It is Equipped with Panasonic BR2032 190mAh lithium battery. It is recommended that you not replace the lithium battery on your own. If the battery needs to be changed, please contact the Vecow RMA service team.
Page 38
Pin No. Function Pin No. Function LAN2_SDP0 LAN2_SDP3 LAN2_SDP1 LAN2_SDP2 2.4.12 CN15 : +12V_SB Output CN15 The pin assignments of CN15 are listed in the following table: Pin No. Function Pin No. Function +12V_SB +12V_SB GETTING TO KNOW YOUR MTC-4015...
2.5 Main Board Jumper Settings 2.5.1 Front View of MTC-4015 Main Board with Jumper Location The figure below is the top view of the MTC-4015 main board which is the main board used in the MTC-4015 Series system. It shows the location of the jumpers.
Page 40
2.5.3 JP5 : LVDS Backlight, Power Selection JP5 provides LVDS voltage selection function, closing Pin 1, 2 is for 3.3V LVDS power input; closing Pin 2, 3 is for 5V LVDS power input. Pin No. Function Pin No. Function +3.3V (Default) GETTING TO KNOW YOUR MTC-4015...
Page 42
+V5A/ +V5/ +V3.3 +5V Standby +3.3V 2.5.7 JP10 : MCU Spy-bi Wire Interface for Download FW JP10 The pin assignments of JP10 are listed in the following table: Pin No. Function Pin No. Function 3.3V_MCU MCU_RST# MCU_PRG GETTING TO KNOW YOUR MTC-4015...
Page 44
2.6.1 Adjust Ignition Control Modes MTC-4015 series provides 16 modes of different power on/ off delay periods adjustable via rotary switch. The default rotary switch is set to 0 in ATX/ AT power mode. DIP-Switch Power on delay Power off delay...
Page 45
Note: 1. DC power source and IGN share the same ground. 2. MTC-4015 supports 6V to 36V wide range DC power input in ATX/AT mode. In Ignition mode, the input voltage is fixed to 12/24/36V for car battery scenario.
SYSTEM SETUP “Please make sure to assemble the system in an anti-static environment.” 3.1 How to Open Your MTC-4015/MTC-4015P Step 1 Remove 20pcs FH M3 screws (circled in red) from back cover. HARDWARE INSTALLATION...
Page 48
Step 4 Remove 4pcs KSH#6-32 screws (circled in red). Step 5 Counterclockwise loosen the locks on each SSD/HDD Tray. Step 6 Remove 5pcs KSH#6-32 screws (circled in red) and 2pcs #4-40 screws (circled in yellow ) on the front panel. Step 7 Take off the front panel.
3.2 Installing DDR3L SO-DIMM Modules Step 1 Install DDR3L RAM module into SO-DIMM slot. Step 2 Make sure the RAM module is locked by the memory slot. HARDWARE INSTALLATION...
3.5 Installing CFast Card and SIM Card Step 1 Remove 2pcs M3x4 Flat head screws on CFast & SIM Card cover on front panel. Step 2 Make sure the system is power-off and unplugged. Step 3 Insert CFast card and push to lock. Step 4 Before Inserting SIM card, make sure the system power is not plugged.
4.2 Main Menu Figure 4 2: BIOS Main screen In this page, you could make sure you CPU type and DRAM type that you are install into this system. 4.2.1 System Time/Date Setting Figure 4 2-1: System Time / Date setting System Time/ Date Press “TAB”...
4.3.2 CPU Configuration Figure 4-3-2: CPU Configuration setup screen Intel Virtualization Technology This for Virtualization Application or platform usage, when enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology. BIOS AND DRIVER SETTING...
4.3.4 AMT Configuration Figure 4-3-4: AMT Setup screen Intel AMT Enables or Disables Intel(R) Active Management Technology BIOS extension. This option just controls the BIOS extension executes. BIOS AND DRIVER SETTING...
4.3.6 Serial Port 2 Configuration Figure 4-3-6 : Serial Port 2 Setup screen Serial Port Enable or Disable Serial Port. Device Setting Current IO addresses and interrupts resource of Serial Port. Change Settings Select another device setting. There are 6 options as follow : •...
Page 68
4.3.8 Serial Port 4 Configuration Figure 4-3-8: Serial Port 4 Setup screen Serial Port Enable or Disable Serial Port. Device Setting Current IO address and interrupt resource of Serial Port. Change Settings Select another device setting. There are 6 options as follow : •...
4.5 Boot Function Figure 4-5: Boot function Setup screen 4.5.1 Boot Option Figure 4-5-1 Boot Option Setup screen Boot option You can select boot device priority in this page. BIOS AND DRIVER SETTING...
APPENDIX A : GPIO and WDT Functions A.1 Function Description The WDT are using internal Super IO function. However, you must entry super I/O configuration mode to set it. Super I/O special address port = 0x2E Super I/O special data port = 0x2F GPIO Logical device is 0x07 A.2 Entry Functions 1.