Ignition Control - Vecow MTC-6000 User Manual

2.5.10 MCU Spy-bi Wire Interface for Download FW
The pin assignments of J1 are listed in the following table :
Header
J1

2.6 Ignition Control

MTC-6000 series provides ignition power control feature for vehicle applications.
The built-in MCU monitors the ignition signal and turns on/off the system
according to pre-defined on/off delay periods.
2.6.1 Adjust Ignition Control Modes
MTC-6000 series provides 16 modes of different power on/off delay periods
adjustable via rotary switch. The default rotary switch is set to 0 in ATX/AT
power mode.
©Vecow MTC-6000 User Manual
Pin No.
1-2
2-3
J1
Interface
DP (DP2)
LVDS
SW1
GETTING TO KNOW YOUR MTC-6000 61