Ssd/Hdd Tray - Vecow MTC-6000 User Manual

3
4
5
6
7
8
Each LAN port is supported by standard RJ-45 connector with LED indicators
to present Active/Link/Speed status of the connection. The LED indicator on the
left bottom corner lightens in solid green when the cable is properly connected
to a 100Mbps Ethernet network, and it lightens in solid orange when the cable
is properly connected to a 1000Mbps Ethernet network. The right LED will keep
twinkling/off when Ethernet data packets are being transmitted or received.
Bottom Led
Left
Right
PD LED indicators as below :
Please note to keep enough power when MTC-6000 is working in high performance.
Location
LAN 1
LAN 2

2.2.10 SSD/HDD Tray

HDD
PWR
POWER
There are 2 front-access 2.5"SSD/HDD trays in the front side of MTC-6000. Just
trigger to open the SSD/HDD tray, up to 4TB is available.
©Vecow MTC-6000 User Manual
E_RX+
-----
-----
E_RX-
-----
-----
10Mbps 100Mbps
Off Solid Green
Flash
Yellow
LED
Color
Green : POE installed & power in
Green
Green : PD installed & power in
Green
DVI-D
DP 1
RESET
1000Mbps
Solid
Orange
Flash Flash
Yellow Yellow
Status
Off : Non-PoE
Off : Non-PoE
DP 2
USB 3.0 USB 3.0
GETTING TO KNOW YOUR MTC-6000
MDI1_P
MDI2_P
MDI2_N
MDI1_N
MDI3_P
MDI3_N
1
Powered
PD
SIM 1 SIM 2
Device
1 2
WLAN WLAN
CFast
LAN1
8
LAN2
38