Vecow MTC-6000 User Manual page 111

GPIO group :
Read button :
Set GPIO configuration to get GPIO state.
Write button :
Set GPIO configuration to set GPIO state.
GPIO output text :
User setting, GPIO output state by hexadecimal bitmask - High/Low.
Use for Write button activate.
GPIO writable text :
User setting, GPIO writable of GPIO configuration
by hexadecimal bitmask - yes/no.
Use for Read/Write button activate.
GPIO input text (read only) :
GPIO input state by hexadecimal bitmask - High/Low.
Use for Read button activate.
GPIO text (read only) :
GPIO output state with input state and configuration.
Use for Write button activate.
GPIO output text (read only) :
GPIO output state with configuration.
Use for Write button activate.
GPIO input pin texts (read only, pin 18 ~ pin 11, pin 8 ~ pin 1) :
GPIO input pin state
Use for Read button activate.
GPIO output pin texts (pin 18 ~ pin 11, pin 8 ~ pin 1) :
User setting, GPIO output pin state
Use for Write button activate.
GPIO pin writable texts (pin 18 ~ pin 11, pin 8 ~ pin 1) :
User setting, GPIO pin writable of GPIO configuration.
Use for Read/Write button activate.
WDT group :
Write button :
Set WDT when WDT setup text is valid.
Stop button :
Cancel WDT and counting.
Use after Write button action.
WDT setup text :
User setting, WDT value, unit : second.
Use for Write button activate.
WDT counting text (read only) :
WDT counting by program timer after set WDT.
Shown after Write button action.
WDT setup day format texts (user setting) :
User setting, WDT value, format : day'hour'minute'second.
WDT counting day format text (read only) :
WDT counting, format : day'hour'minute'second.
©Vecow MTC-6000 User Manual Appendix A 101