Vecow MTC-6000 User Manual page 94

4.3.11 SATA Configuration
Figure 4 3-11 : SATA Devices Settings
SATA Controller(s)
Enable or disable SATA Device.
SATA Mode Selection
Determines how SATA controllers operate.
Software Feature Mask Configuration
RAID OROM/RST driver will refer to the SWFM configuration to enable or
disable the storage features.
Aggressive LPM Support
Enable PCH to aggressively enter link power state.
Options for each SATA port
Port 0
Enable or disable SATA port.
SATA Device Type
Identifies if the SATA port is connected to solid state drive or hard disk drive.
©Vecow MTC-6000 User Manual BIOS SETUP 84