Replacing The Y Flexible Cable - GRAPHTEC FC9000-75 Service Manual

7.2.16 Replacing the Y Flexible Cable

How to detach the Y Flexible Cable
(1) Detach the right side cover (Refer to subsection 7.1.1.).
(2) Detach the control panel assembly (Refer to subsection 7.1.3.).
(3) Detach the center cover (Refer to subsection 7.1.4.).
(4) Release the cable ties holding the Y flexible cable.
(5) Disconnect the Y flexible cable from the main board.
(6) Remove M3L4 binding head screw holding the cable tie on Y slider, and then detach it.
(7) Disconnect the Y flexible cable from the Y relay board.
(8) Peel off the Y flexible cable from the Y flexible cable guide.
FC9000-UM-251-9370
Cable tie
7 DISASSEMBLY AND REASSEMBLY
Cable tie
Y flexible cable
Main board
M3L4 binding head screw
Y flexible cable
Y relay board
7-36