GRAPHTEC FC9000-75 Service Manual page 173

Error
Error Display
code
E01028
FC9000-UM-251-9370
Verification item
Confirm the power The power cable
cable of optional of optional rewind
rewind motor shaft motor shaft is not
is connecting to the connecting to the
connector of rewind connector of rewind
motor shaft. motor shaft.
Confirm the power The power cable of
cable of optional optional rewind motor
rewind motor shaft is shaft is broken.
not broken.
9-16
9 TROUBLESHOOTING
Cause Solution
Connect it securely.
Replace the optional
rewind motor shaft if it is
broken.