Table of Contents
Advertisement
7
DISASSEMBLY AND REASSEMBLY
How to reinstall the Y Flexible cable
(1) Fold the Y relay board side of Y flexible cable at same position with the removed Y flexible cable.
(2) Move the pen block to the left end.
(3) Fit the Y-flexible cable into the Y-rail as shown below. The Y-flexible cable shouldn't touch the left side
plate. Allow a 25 mm space between the left end of the Y-flexible cable and the left side.
Y flexible cable
25 mm
Left side plate
Pen block
(4) Secure the Y-flexible cable onto the flexible cable guide of the Y-rail using double-sided adhesive tape.
(5) Reattach the other parts in the reverse order in which they were detached.
(6) Confirm the wiring for Y flexible cable (Refer to subsection 7.4.).
FC9000-UM-251-9370
7-37
Advertisement
Table of Contents
