Table of Contents
Advertisement
8
Electrical Adjustment
(5) Press the PAUSE/MENU key to display the following menu.
(6) Press the Right Position key to display the adjustment menu shown below.
(7) Install the fiber tip pens to the tool 1 holder (rear) and 2nd pen station (Right side plate of holder).
(8) Press the down position key until the following menu is displayed.
(9) Press the F2 key to display the following menu.
(10) Set adjustment pen force to 10 for the fiber tip pens.
Press the POSITION (
) key to increase or decrease the value to set.
(11) Press the ENTER key to display the following menu.
(12) Press the UP or Down position key until the following menu is displayed.
FC9000-UM-251-9370
8-58
Advertisement
Table of Contents
