Table of Contents
Advertisement
3
PARTS NAMES and FUNCTIONS
(3) Make sure that the tool bracket is engaged on the tool's flange, and then tighten the screw.
Flange
Bracket to hold tool
Attaching a Pen to the Two-Pen Holder (Option)
The two-pen holder is a factory-installed option, and cannot be retrofitted.
(1) Loosen the pen holder screw
Bracker to hold tool
Tool holder
Tool holder
Bracker to hold tool
Top view
(2) While pushing the pen holder in the upward direction, push the pen all the way into the holder until its
flange contacts the upper part of the holder.
• When you push the pen holder with your fingers, the blade tip may be protruding. Take care not to cut
your fingers.
Bracker to hold tool
Tool holder
Flange
For half cutting
(backward)
For cutting out
(forward)
Top View
FC9000-UM-251-9370
3-4
Advertisement
Table of Contents
