Supplied Equipment; Pre-Installation Checklist - Nortel 2245 Installation And Configuration Manual

Page 62 of 206 Installation

Supplied equipment

Pre-installation checklist

553-3001-304 Standard 3.00
• screws – used to mount the WLAN IP Telephony Manager 2245 to the
wall. Four #8 - ¾" panhead wood screws (or similar devices) are
required.
• 10BaseT CAT5 cable with an RJ-45 connector for the optional WLAN
Application Gateway 2246 – provides a connection to the Ethernet
switch.
• CAT5 cable with an RJ-45 connector for the WLAN IP Telephony
Manager 2245 – provides a connection to the Ethernet switch.
• DB-9 female null-modem cable – required for initial configuration of the
WLAN IP Telephony Manager 2245 and WLAN Application Gateway
2246.
Each WLAN IP Telephony Manager 2245 and WLAN Application Gateway
2246 is shipped with one Class II AC adapter with 24V DC, 1A output.
Ensure that the following requirements have been met prior to installation:
• The location chosen for the WLAN IP Telephony Manager 2245 and
WLAN Application Gateway 2246 is adequate and power is available.
• Access Points are SVP-compatible and coverage is adequate.
• A dedicated line is available for remote modem access if needed.
• The telephone system administrator is on-site to program the existing
telephone system.
September 2004