Nortel 2245 Installation And Configuration Manual page 79

WLAN IP Telephony Manager 2245 configuration
— Enter DHCP. Ensure that the IP address of the master WLAN IP
Telephony Manager 2245 has been configured in the DHCP server
and configure the other WLAN IP Telephony Managers 2245 to
obtain the information from the DHCP server.
— Enter DNS. Ensure that the IP address of the master WLAN IP
Telephony Manager 2245 has been configured in the DNS server
and configure the other WLAN IP Telephony Managers 2245 to
retrieve this information from the DNS server.
• First Alias IP Address / Last Alias IP Address – enter the range of IP
addresses that this WLAN IP Telephony Manager 2245 can use when
acting as a proxy for the wireless handsets.
Note: All alias addresses must be on the same subnet as the WLAN IP
Telephony Manager 2245. The IP addresses cannot be duplicated on
other subnets or WLAN IP Telephony Managers 2245. There is no limit
to the number of IP addresses that can be assigned, but the capacity of
each WLAN IP Telephony Manager 2245 is 500 wireless handsets.
• SVP-II Mode – select NetLink IP.
Ethernet link –
•
the link speed.
System Locked –
•
maintenance. The default is
calls from starting. Enter
Maintenance Lock –
•
Y
(Yes) after certain maintenance activities that require reset are
performed, such as changing the IP address. Maintenance Lock prevents
any new calls from starting. This option cannot be changed. It is
automatically set by the system. Reset the WLAN IP Telephony
Manager 2245 at exit to clear Maintenance Lock.
• Reset – if this option is selected, a prompt appears to reset the WLAN IP
Telephony Manager 2245 when exiting the SVP-II Configuration screen.
• Reset all SVP servers – if this option is selected, all WLAN IP
Telephony Managers 2245 on the subnet are reset.
Note: Resetting the WLAN IP Telephony Manager 2245 terminates any
calls in progress.
select auto-negotiate unless there is a need to specify
use this option to take the system down for
N
(No). Select
N
to restore normal operation.
the system automatically sets this option to
WLAN IP Telephony
Page 79 of 206
Y
(Yes) to prevent any new
Installation and Configuration