Nortel 2245 Installation And Configuration Manual page 190

Page 190 of 206
553-3001-304 Standard 3.00
Appendix A: WLAN Application Gateway 2246
Follow the steps in Procedure 29 to transfer the software using FTP.
Procedure 29
Transferring the software using FTP
1 Navigate to the OAI Box Configuration screen and place the system in
Maintenance Lock before proceeding with the FTP procedure.
Note: This prevents new calls from starting. No calls may be in progress
during the FTP procedure.
2 Connect to the WLAN Application Gateway 2246 using the command:
FTP <hostname> or FTP <IP address>.
3 Log in using the administrator login admin and password (default is
admin).
Result: A login confirmation message displays, followed by the FTP>
prompt.
4 At the FTP prompt, type binary.
Result: A confirmation message displays.
5 At the FTP prompt, use the put command to transfer the functional code
file to the client server or WLAN Application Gateway 2246.
Rename the file before loading it into the WLAN Application Gateway
2246. The download file is named MOG700.bin. Rename the file
fnctla.bin.
Example: put mog700.bin fnctla.bin
6 After files are transferred, use the Quit command to quit FTP.
7 Navigate to the NetLink OAI System screen for the WLAN Application
Gateway 2246
8 Select System Status.
9 Select Software Versions to verify that software versions for the WLAN
Application Gateway 2246 are correct.
10 Reset the system through the OAI Box Configuration screen in order to
restore Maintenance Lock to "N".
September 2004
End of Procedure