Nortel 2245 Installation And Configuration Manual page 195

Appendix A: WLAN Application Gateway 2246
After configuring the WLAN Application Gateway 2246, perform the
following steps to again use the serial port as the communication link with the
Application Server.
Procedure 31
Using the serial port as the Application Server communication link
1 Disconnect the terminal or PC from the serial port on the WLAN
Application Gateway 2246.
2 Reconnect the communication cable between the WLAN Application
Gateway 2246 and the Application Server.
3 Reset the system.
Normal communication between the Application Server and WLAN
Application Gateway 2246 commences.
End of Procedure
WLAN IP Telephony
Page 195 of 206
Installation and Configuration