Nortel 2245 Installation And Configuration Manual page 150

Page 150 of 206
553-3001-304 Standard 3.00
Troubleshooting
• next six digits – Manufacturer Code. The Manufacturer Codes are
defined as follows:
— IP Phone 2004 Phase 1 – 006038
— IP Phone 2004 Phase 2 – 000ae4
— WLAN Handsets 2210/2211 – 00907a
• last two digits – Release Code. The Release Codes are defined as
follows:
— IP Phone 2004 Phase 1 – 0
— IP Phone 2004 Phase 2 – 2
— WLAN Handset 2210 – 0x06
— WLAN Handset 2211 – 0x07
-> dsetShow
TN IP Address
---- --------------- ------------------ ----------
6004 192.168.10.100 180060387641c76600
600A 192.168.10.200 3000907a017e476607
value = 0 = 0x0
e2dsetShow command
The e2dsetShow command is used for the WLAN Handsets 2210/2211 in the
same manner as for the IP Phones.
September 2004
Hardware ID TermType
i2004
i2004