Nortel 2245 Installation And Configuration Manual page 108

Page 108 of 206
553-3001-304 Standard 3.00
WLAN Handsets 2210/2211 configuration
FCN
The key toggles between three coverage modes:
• detect dBm coverage
• detect overlap or conflicts
• confirm supported data rates
Note: The wireless handset remains in Site Survey mode until it is
powered off.
3 When testing is complete, press Power Off / End Call to power off the
wireless handset.
Numbers racing across the wireless handset display indicate AP information
is being obtained. A
properly and the wireless handset cannot find any APs.
Detect dBm coverage
FCN
Press to toggle to the Site Survey function that shows the top four APs.
Walk the perimeter of the site. The two-line display on the wireless handset
shows the top four APs that the wireless handset can contact. The information
is shown in code as follows.
XXX1 YY XXX2 YY
XXX3 YY XXX4 YY
-dBm
September 2004
End of Procedure
Waiting
message indicates the system is not configured