Table of Contents
Advertisement
ColorCut Pro - Setting the Camera Sensor Offset to the Blade
1.
Load blank paper sheet(s) into the media tray.
Adjust the self centering side guides to the
edges of the media.
tight against the side of the media.
2.
Start the Wi-Fi HotSpot on your computer (as
described in Section 2 of this manual). Ensure
1 connected device appears (this will be the IP
address of your cutter), in the HotSpot.
3.
Launch the ColorCut Pro application from your
computer.
Ⓐ
If the SC5000 is connected under the [SETTINGS] button, and your Wi-Fi Hot-
Spot is active, your should see a preview of the Vison3's CCD camera in the 'Live
Preview' window
that 'OBTAIN IP ADDRESS Automatically' is set under the [SETINGS]- live video
connection option. Then restart the ColorCut Pro app.
4.
At the top of the ColorCut Pro window, click
on the [PRODUCTIVITY] button to display the
productivity window.
Intec Printing Solutions - Manual for ColorCut SC5000 Auto-Sheet Digital Die-Cutter ............................................................ Page No: 49
Ensure they are not too
Ⓐ
Ⓐ
. If not check the Wi-Fi Hot Spot has a device connected, and
Advertisement
Table of Contents
