Table of Contents
Advertisement
Chapter 1. UNPACKING & POSITIONING THE INTEC SC5000
1.1 Contents of the ColorCut SC5000 (Overview)
Your Intec ColorCut SC5000 is packed in 1
box/crate.
The box/crate contains :
The ColorCut SC5000 Cutter (i))
'Dual grip' Feed rollers (iia)
SC5000 Stand (iii)
The Accessories box (iv)
A USB Wi-fi Dongle (iii)
And the ColorCut Pro Software (v)
The Stand is not assembled and requires
assembly.
The Summa Wheels
enable the cutter to be easily moved, OR, but
adjusting the height foot, it will level the unit
and prevent it from moving.
The standard 'Dual Grip' front media feed
rollers will be already installed in the SC5000
cutter.
NOTE: The pressure may not be engaged, so
please check before using your cutter.
The USB Wi-Fi dongle is for PC users, that
may not have Wi-Fi capabilities on their PC,
and it enables a Live Preview of the scanning
and cutting process.
The fi nal items found inside the accessories
box, include the power cable and USB cable
plus a disk containing your ColorCut Pro
Software.
A Blade Holder, a selection of
Cutting Blades, a Calibration Pen Tool and a
Creasing Blade.
Item (i) - Intec ColorCut SC5000 Cutter
(Supplied)
Item (iii) - STAND
(Side Legs, Cross Braces, Assembly Bolts & Wheels)
Item (iia) - DUAL GRIP media feed roller
(Pre-fi tted in front of SC5000)
Item (iii) - USB Wi-fi Dongle
Item (iv) - Manuals, USB & Power Cables
Advertisement
Table of Contents
