Table of Contents
Advertisement
Chapter 4. Connecting and powering on the cutter.
4.1 Turning the cutter on (The Initialisation Process)
1.
Securely plug the power cord into the mains socket
connect to an electrical outlet of the specifi ed voltage.
2.
Turn on the power using the mains switch
The LCD Panel will illuminate and the Intec Logo will be displayed D, after approx
3.
5 secs, the cutter will emit a beep sound and the tool carriage will move the the far
left position (If not already in that position). The main control system will then boot,
and the Wi-Fi function will initialise. After approx 35 -40 secs, the illumination strip
under the front cover and above the vacuum belt will illuminate
screen will be displayed on the LCD panel F. Once the HOME screen is displayed
on the LCD panel the cutter is Online and ready to use.
Intec Printing Solutions - Manual for ColorCut SC5000 Auto-Sheet Digital Die-Cutter ............................................................ Page No: 30
C
.
E
B
on the rear panel and
C
B
E
and the HOME
D
3
30 - 40 secs
0
initialisation
s
F
Advertisement
Table of Contents
