displayed on the LCD panel . This is a safety warning, that prevents the carriage
moving until you press the [ENTER] (hard) key
IF you have powered on the SC5000 cutter using the POWER switch at the back of
the machine (See section 4.1) and the Power switch is Illuminated, but you do not
see anything on the display, and the RED LED is not Illuminated. Then it is likely the
EMS switch (Emergency Stop Switch) (see section 1.3 item 9 ) has been depressed/
activated. To release the EMS function - press and slightly twist the EMS button so it
goes back UP. Now Power will reach the display and the red LED K will be illuminated
....................................................................................................................................
6.2.3 The HOME screen ................................................................................................. 40
Intec Printing Solutions - Manual for ColorCut SC5000 Auto-Sheet Digital Die-Cutter .............................................................. Page No: 4