Table of Contents
Advertisement
ColorCut Pro - Setting the Sensor Offset (Cont.)
5.
From the Media Options
click on the media size
to match the paper size
you placed in the feeder.
IF selecting A4, or US
Letter, ensure you set
SEF (Short Edge Feed)
orientation. Then click
[OK].
Ⓓ
7.
Click the [AutoFind] button, a message will appear asking you to place a sheet
of media in the cutter, and click OK, then the Intec
ColorCut SC5000, will load the sheet automatically
from the feeder and use the Pen Calibration Tool, to
repeatedly draw a spiral pattern
registration mark. it will then move the Vision3 sensor
over to fi nd the mark and automatically enter the
values into your Sensor Offset X and Y settings. Once
completed you will see a confi rmation message.
You can now close this window, the calibration for ColorCut Pro is now complete.
Intec Printing Solutions - Manual for ColorCut SC5000 Auto-Sheet Digital Die-Cutter ............................................................ Page No: 50
Ⓒ
Ⓐ
Ⓑ
Ⓔ
to simulate a
6.
In the main ColorCut Pro
application screen, click
on the [SETTINGS] button.
7.
The ColorCut Settings
dialogue box will appear.
Here you can manually
enter the Sensor offset
Ⓑ
Or automatically set it by
clicking the [AutoFind]
button Ⓒ.
(The force used, can be manually
Ⓓ
set here
, by default for you.
>200 <320g this should not need
to be changed)
Ⓐ
Ⓔ
Advertisement
Table of Contents
