Table of Contents
Advertisement
1.3 Identifying the key features of your ColorCut SC5000
⑧
②
③
B
Tool Carriage ...................... Holds the Cutting tool, moving left and right.
C
Tool 1 .................................. Holds the Cutting tool (or Calibration Pen).
D
Tool 2 .................................. Holds the Creasing tool (Or Optional 2nd Blade)*.
E
Wi-Fi Antenna .................... Used to stream Live Video from Vison3 Sensor.
F
Retractable exit tray .......... Drawer exit tray catches cut media.
G
Main Feed Roller ................ Used to driver media back & forward during cutting.
H
Secondary Grip Roller ....... Secondary grip rollers, enable extended cutting area.
I
Front 'Dual Grip' rollers ..... Levers to release 'Dual Grip rollers' when changing
J
Emergency Stop Switch..... EMS, press to stop power in an Emergency.
K
Exit Tray Drawer handle..... Used to open the Exit Tray Drawer
L
Exit Tray ............................. Exit Tray extended and in latched position.
M
Stacker Control Button ...... Silver button used to control media stack tray.
N
5" LCD Touch Panel ........... Main TOUCH screen control panel.
O
Hard Keys ........................... Used to set additional options on the control panel.
Intec Printing Solutions - Manual for ColorCut SC5000 Auto-Sheet Digital Die-Cutter ............................................................ Page No: 12
①
④
⑤
Drives cutting tool up/down
Press to Lower, Stop or Raise the Media Stack Table.
J
⑧
⑥
⑦
Advertisement
Table of Contents
