Table of Contents
Advertisement
Safety Information
Safety measures
Please read the information and safety measures carefully prior to installation and initial
operation of the unit.
• Do not place any magnetic objects in the vicinity of the cutting head; otherwise
uniform contact pressure may not be ensured.
• Do not remove the connection cable to the computer while cutting is in
progress.
• Relieve the pressure on the pressure rollers when not in use by moving the
pressure lever up.
• Do not open or reach into the unit when it is connected to electricity supply.
• Never open the casing and do not make any modifi cations to the unit yourself.
• Ensure that neither liquids nor metal objects are put inside the Intec SC5000
Sheet Label Cutter.
• Ensure that the wall socket used is grounded.
• Ensure that the connected voltage (230V) does not deviate by more than
±10%. Otherwise install a voltage stabiliser.
• Remove the power plug from the unit if it will not be in use for a longer period
of time.
• Never reach into the unit in the vicinity of the blade holder during the cutting
operation
• Stop any cutting jobs in progress before re-adjusting the blade holder
• Always ensure that the Auto Sheet Cutter is out of reach of children during
operation and never leave the unit or individual parts of it switched on without
supervision.
• Do not touch the tip of the cutting blade to avoid injury.
• Always place the unit on a stable base or use the supplied stand to prevent
it from falling down.
• Disconnect from the power supply during thunderstorms; it can be damaged
or destroyed by electrical surges caused by lightning.
Intec Printing Solutions - Manual for ColorCut SC5000 Auto-Sheet Digital Die-Cutter .............................................................. Page No: 6
Advertisement
Table of Contents
