1.5 POSITIONING your ColorCut SC5000
The Intec ColorCut SC5000 weighs 115Kg ( 253 Lb) and is supplied with a stand to
provide an ergonomic working height.
2.3.2 Positioning Requirements & Working Space
1. Working Space is different to Machine dimensions.
2. Ensure there is suffi cient space at the rear of the SC5000 to easily load sheets and
adjust the media side guides.
3. Ensure there is suffi cient space above the SC5000 to easily press the Emergency
Stop Switch in case of a problem.
4. Ensure there is space by the side of the machine to operate the control panel and
the feeder control button.
5. Ensure there is space for the retractable exit tray to be opened, without causing an
obstruction to walkways.
Working Space
When deciding where to position, the Intec SC5000, open
the Retractable media exit tray at the base of the machine.
Working Space
1,870mm
(73.6")
SRA3
13 x 19"
Sheet
in
Exit
SRA3
13 x 19"
Sheet
in
Feeder