Figure 5 Optional Lift Handles Attached To The Storage Enclosure; Figure 6 Left And Right Lift Handles - Seagate Exos CORVAULT Hardware Installation And Maintenance Manual

Figure 5 Optional lift handles attached to the storage enclosure

7. To use the default belt straps, perform the following actions:
a. Position one person at the front to grip the front belt strap securely by both loops.
b. Position one person at each rear corner to grip both rear belt straps by the loops on that side.
c. Simultaneously lift the storage enclosure, using appropriate safe lifting technique while moving it to a static-
protected location, and then to the mechanical lift for mounting to the rack cabinet.
d. Skip the optional lift handle step.
8. For the optional lift handle procedure, perform the following actions:
a. Skip the default belt strap step.
b. Separate the left lift handles from the right lift handles. The left ones have a locking edge mid-point on the
bracket, while the right ones have a locking edge toward the bottom of the bracket.

Figure 6 Left and right lift handles

c. Align a left lift handle to the left sidewall of the storage enclosure chassis.
d. Holding a lift handle flat against the front-most portion of the left chassis sidewall, slide it upward until its push-
pull pin engages the push-pull pin hole to secure it.
18 Chapter 3 Initial installation