4
3
6
5
Figure 42 Sample HBA data and management connections
10. Connect the Ethernet cables numbered 9 and 10 to the host system or management network.
11. Facing the front panel, press both safety lock switches to release the rails.
12. Carefully exert even pressure on both sides of the storage enclosure front and continue insertion all the way into the
rack until it locks in the storage position. Do not force insertion, which could damage the rails.
13. Secure the storage enclosure chassis flanges to the rack cabinet, fastening the top captive thumbscrew on each side
until tight.
8
7
6
5
10
10
4
3
2
1
9
9
Chapter 4 Route power cords and data cables
8
7
2
1
47