f. Using the front latch of the auxiliary bay cover, remove it and set it aside to access the auxiliary bay.
Figure 34 Auxiliary bay latch
g. Continue insertion of the final 10 disk drives to complete population of the auxiliary bay using the same
progression from top to bottom and from front to back.
h. Replace the auxiliary bay cover, latching it firmly in place.
13. (Optional) Lower and remove the mechanical lift.
Test enclosure connections
After completion of all installation procedures, the storage enclosure is ready for connection to power. You can only
connect the storage enclosure to a power source that has a safety electrical earth connection. Have a qualified electrical
engineer confirm the earth connection meets the product specifications.
CAUTION If you install multiple storage enclosures in a rack cabinet, the importance of the earth connection
increases, since each storage enclosure increases earth leakage current.
IMPORTANT Only a qualified electrical engineer who meets local and national standards should perform the
inspection.
40 Chapter 3 Initial installation