Figure 56 Removal Of The Psu Without Power; Figure 57 Removed Psu - Seagate Exos CORVAULT Hardware Installation And Maintenance Manual

Figure 56 Removal of the PSU without power

6. Using the handle, gently remove the PSU using a steady pressure to pull it from the storage enclosure while
supporting it with your other hand, and then set it aside.

Figure 57 Removed PSU

7. While maintaining proper static protection, remove the new PSU from its static-protected container.
8. Inspect the PSU carefully to make sure it is not damaged or bent in any way, paying particular attention to connector
pins.
9. Rotate the PSU handle to the open position, grasping it in one hand while using the other to support the PSU.
10. Slide the PSU into the empty PSU slot until you feel it connect to the power midplane.
Chapter 7 In-service field maintenance
73