Figure 4 Default Belt Straps Already Around The Storage Enclosure - Seagate Exos CORVAULT Hardware Installation And Maintenance Manual

Hide thumbs Also See for Exos CORVAULT:
Table of Contents

Advertisement

There are two primary packing configurations: a three-piece or a regular slotted container. Neither configuration
includes the disk drives, which ship separately, based on system configuration: Single disk drives, 10-packs, or 24-packs.
Set disk drives aside until after installation of the storage enclosure in the rack cabinet.
Both containers come strapped to a pallet and have edge protector reinforcements on all four corners. Each storage
enclosure ships inside a plastic bag with three belt straps around the chassis. Both configurations require the same site
preparation and vigilance during handling.
To unpack the enclosure:
1. Prepare the site for the storage enclosure installation. This includes meeting all product specifications and providing
a clean, clear, static-protected environment prior to unpacking the storage enclosure.
2. Examine packaging for damage. This includes cuts, water damage, or evidence of mishandling during shipment.
3. If there is damage, photograph and document it, but do not proceed. You must retain all original packaging for
product returns.
4. Remove pallet strapping, the cardboard base, and all protective foam above the storage enclosure to access
container contents.
5. Slide the plastic bag to remove it from surrounding the storage enclosure.
6. Prepare to remove the storage enclosure from the container, using one of two options, depending on the shipment:
a. Default provided belt straps: Locate three to four people to assist in moving the storage enclosure onto the
mechanical lift, using an appropriate safe lifting technique and following the steps for default belt straps.

Figure 4 Default belt straps already around the storage enclosure

b. Optional lift handles: Locate two to four people to assist in moving the storage enclosure onto the mechanical lift,
using an appropriate safe lifting technique and following the steps for the optional lift handles.
Chapter 3   Initial installation
17

Advertisement

Table of Contents
loading

Table of Contents