Figure 28 Proper Installation Of The Cma Bracket Assembly - Seagate Exos CORVAULT Hardware Installation And Maintenance Manual

5. Complete the following actions to verify the CMA bracket installation:

Figure 28 Proper installation of the CMA bracket assembly

a. Verify the outer blue spring of the CMA bracket assembly securely clips to the CMA B bracket on the outer rail
and that the inner blue spring securely clips to the CMA A bracket.
b. Verify that all cable holders open upward and that you can read the embossed name King Slide when examining
the top of each cable retainer.
6. After fully retracting the chassis, tug on the CMA bracket to make sure you properly and securely installed it.
7. Install the crossbar by snapping each captive thumbscrew into the lower of the two available holes, twisting to the
right to tighten them and stabilize the rails.
36 Chapter 3 Initial installation