Separate the inner rails from the outer and mid rails
The rails come in the shipping container with an inner rail inside each of the outer and mid rail sub-assemblies. You
must separate them before attaching outer and mid rail sub-assemblies to the rack cabinet and inner rails to the
storage enclosure.
To separate the inner rails from the outer and mid rail sub-assemblies:
1. After removing each rail assembly from its packaging, orient the one with the L embossed on it to your left, the rail
assembly with the R embossed on it to your right, and embossed arrows for both pointing up.
1
Item
1
2
3
4
5
Figure 7 Separated left rail assembly, inner sides facing
2. Examine the rails to distinguish each component, particularly the ball bearing retainer and mid rail.
20 Chapter 3 Initial installation
2
3
7
Description
Front mount bracket
Outer rail
Ball bearing retainer
Rear mount bracket
Mid rail, slides within outer rail
4
8
9
Item
6
7
8
9
10
5
6
10
Description
End cap
Slotted screw holes
T-pin keyholes
Safety lock
Inner rail