Figure 8 Extension Of Left Inner Rail Beyond Mid Rail; Figure 9 Location Of Inner Rail Safety Lock - Seagate Exos CORVAULT Hardware Installation And Maintenance Manual

WARNING! Carefully inspect the rails. Do not use damaged or warped rails. Return them. Rail failure can allow
the storage enclosure to fall and result in serious injury since the load on them can exceed 300 lb (136 kg).
3. (Optional) Clip an end cap into the slots at the rear outer side of each rail, locking it in place.
4. Extend the mid and inner rail on the outer rail of the left rail assembly until the safety lock engages with a click.

Figure 8 Extension of left inner rail beyond mid rail

5. Turn the left rail assembly over, then press the safety lock to disengage the inner rail.

Figure 9 Location of inner rail safety lock

6. Slide out the left inner rail until it separates from the outer and mid rail subassembly, setting it aside.
7. Turn the left outer and mid rail subassembly back over, then locate the mid rail release switch.
Chapter 3 Initial installation
21