Storage U Sage; Network Settings; Change The Ip Configuration - Seagate SRN21C User Manual

Storage
You can check how much storage is available on your Personal Cloud 2-Bay and format your
drive.
1. Open the Device Manager.
2. Click Show advanced settings, and then click Storage.
- Overview. Review the total device storage and the status of internal and external
volumes (USB attached devices).
- Network Drives. Format (erase all data) but keep the volume or Delete (remove
the volume). The Personal Cloud 2-Bay has one volume on each disk.
Important: Formatting your drive erases all data. Before formatting the drive, back up your
data to another drive.

Network Settings

Usually, you do not need to change your Personal Cloud 2-Bay network settings. If you are
having issues with network connectivity, changing the settings might solve the problem.
Note: Changing network settings requires some understanding of networking and your
specific setup.

Change the IP configuration

By default, the IP configuration uses DHCP, a standard networking protocol that dynamically
selects IP addresses for interfaces and services.
If you are having issues with network connectivity, you might want to use a fixed IP address.
1. Open the Device Manager.
2. Click Show advanced settings, and then click Network.
3. On the Connections tab, click Edit.
4. Click either the IPv4 or IPv6 tab.
Note: Not all devices support IPv6. Go to test-ipv6.com to determine if IPv6 is supported.
5. (IPv4). Select Manual or Automatic (DHCP) from the pull-down menu, and then click
Save.
6. (IPv6). Select an option from the pull-down menu, and then click Save.
Seagate Personal Cloud 2-Bay User Guide
Link the entire line to Open the Device Manager
Link the entire line to Open the Device Manager
31