Figure 19 Left And Right Inner Rail Edge Details; Figure 20 Left Inner Rail Alignment To Storage Enclosure Chassis; Figure 21 Lock Of Rail Against T-Pins, Alignment Of Screw Holes To Chassis Sidewall - Seagate Exos CORVAULT Hardware Installation And Maintenance Manual

To attach the inner rails to the storage enclosure:
1. Examine the inner rails, locating the smooth inner edge of the rail, the flanged outer edge, and the rear top notch.

Figure 19 Left and right inner rail edge details

2. Orient the left inner rail so that the flat face at the front of the rail is to your right, the top notch is to your left, and
the smooth inner edge is away from you.
3. Face the left storage enclosure sidewall, then align the left inner rail's key holes to the six (6) pairs of sidewall T-pins.

Figure 20 Left inner rail alignment to storage enclosure chassis

4. Slide the inner rail toward the rear until it locks against the T-pins and the screw holes align.

Figure 21 Lock of rail against T-pins, alignment of screw holes to chassis sidewall

5. Secure the rail by inserting and tightening five (5) M3 screws with the T10 Torx to a torque of 12 lbf-in (1.36 N-m).
Chapter 3 Initial installation
29