Divert Calls To A Contact - Polycom VVX 150 Manual

Procedure
1 Select Forward.
2 If your phone has multiple lines, select a line.
3 From the Forwarding Type Select screen, select your forwarding type, and select Disable.
Related Topics
Forwarding Incoming Calls to a Contact

Divert Calls to a Contact

You can divert all incoming calls from a particular contact to another contact.
Procedure
1 Select Directories > Contact Directory.
2 From the Contact Directory, select a contact.
3 On the Contact Information screen, select Edit.
4 From the Edit Contact screen, select Divert Contact, and enter a contact's number.
5 Select Auto Divert > Enabled.
6 Select Save.
Related Topics
Redirecting Incoming Calls
Call Precedence and Preemption
If your administrator has enabled call precedence and preemption, your outgoing calls are assigned a
precedence level.
If you are in an active call and receive a new call with a higher precedence, your active call is
preempted—ended. If your call is preempted, your phone plays a preemption tone and displays a
preemption screen. The preemption screen is shown both for caller and callee. After you acknowledge
the preemption screen, you can answer, reject, or ignore it. The notification screen disappears if you
do not acknowledge the preemption notification after the display time out as defined by your admin.
When you receive higher precedence call, the lower precedence call gets disconnected, private line
and shared line preemption screen displays as below.
Printed from Polycom, Inc. (http://documents.polycom.com) #{renderLang "en" MsgPDFPage} 63