Pass An Scap Call; Resume A Passed Scap Call - Polycom VVX 150 Manual

Related Topics
Alcatel-Lucent Shared Call Appearance

Pass an SCAP Call

When you pass a call, you enable SCAP group members to view the held status of the call and resume
the call.
You cannot pass active bridge calls on the shared line.
Procedure
•
During an active call, select Pass.
The call is placed on hold and all members on the shared line can view and resume the passed
call.
Related Topics
Holding or Passing SCAP Calls

Resume a Passed SCAP Call

Any group member can resume a passed call on the shared line.
When an active call is passed on the shared line, all group members are notified of the call's new
status by a flashing red LED light on the line key on all members' phones, if enabled by your system
administrator.
When a passed call is resumed by another group member, the other group members are notified of the
call's new status with a steady red LED light on the line key on the members' phone.
Procedure
•
Do one of the following:
Select the corresponding line key and lift the handset.
Press and hold the corresponding line key and select Resume.
Related Topics
Holding or Passing SCAP Calls
Printed from Polycom, Inc. (http://documents.polycom.com) #{renderLang "en" MsgPDFPage} 84