Change Your Office Hours For Power Saving Mode - Polycom VVX 150 Manual

Power Saving Mode
By default, Poly phones enter power saving mode and turn off the screen after being idle for a certain
period of time to conserve energy.
You can determine the period of time that the phone is idle before the screen turns off, and you can set
different idle timeouts for office hours and off hours, such as evenings and weekends. The phone exits
power saving mode if an event occurs—for example, if there is an incoming call or message. If you
enable a screen saver, power saving mode still activates.
You can update the following power-saving settings:
•
Office Hours: When you start work and how long you're in the office each day.
•
Timeouts: The period of time the phone is idle before the screen turns off.
Note By default, Poly VVX Business IP systems enter power saving mode after a period of idle
time to conserve energy. However, Poly Trio systems don't enter power saving mode
while idle in the Bluetooth or Wi-Fi menus. To ensure that the system enters power
saving mode, exit the Bluetooth or Wi-Fi menu.
Related Topics
Poly VVX Business IP Phone Settings

Change Your Office Hours for Power Saving Mode

When you update your office hours, you specify when you start and how long you work each day. After
your work hours, the phone is idle and goes into power saving mode.
Procedure
1 Go to Basic settings.
2 Select Power Saving > Office Hours and select Start Hour.
3 Select a day of the week, and using the 24-hour clock, enter a start time from 0 to 23.
4 Select Save.
5 On the Office Hours screen, select Duration.
6 Select a day of the week and enter a duration of 0 to 12 hours per day.
7 Select Save.
Related Topics
Power Saving Mode
Printed from Polycom, Inc. (http://documents.polycom.com) #{renderLang "en" MsgPDFPage} 164