Send A Group Page; Receiving Pages - Polycom VVX 150 Manual

•
Emergency—By default, broadcasts sent to group 25 are considered Emergency broadcasts.
An Emergency broadcast interrupts Normal broadcasts, Priority broadcasts, and active calls and
plays out at near maximum volume even if Do Not Disturb is enabled.
To send and receive pages, you need to subscribe to certain paging groups. By default, you are
subscribed to paging groups 1, 24, and 25, and you can send and receive pages to those paging
groups. Contact your system administrator to find out which paging group you are subscribed to.
Related Topics
Accessing, Sending, and Broadcasting Messages

Send a Group Page

When you send a group page without selecting a page group, it is automatically sent to the default
paging group, which is group 1. You cannot send a page while you are in an active call.
Procedure
1 From the Lines screen, select the Paging soft key.
2 From the Paging Groups screen, select a paging group.
3 To begin a page, select Page.
Just before the page starts, you'll hear an alert tone, and then the page begins.
4 Begin speaking.
5 To end the page, select End Page.
Related Topics
Broadcasting Messages with Group Paging

Receiving Pages

You receive pages on the paging groups you are subscribed to as well as Group 24 (Priority pages),
and Group 25 (Emergency pages). When you enable Do Not Disturb, you only receive Emergency
pages. Non-emergency pages do not display or play on your phone.
How you receive a page depends on the priority of the page, whether you are in an active call, and
whether your phone is set to receive a page during an active call. When you receive a page, the page
is always played through the phone's speakerphone. You cannot play a page through your handset or
headset.
When you enable Do Not Disturb on your phone, you receive only Emergency broadcasts. Non-
emergency broadcasts do not display or play on your phone.
Printed from Polycom, Inc. (http://documents.polycom.com) #{renderLang "en" MsgPDFPage} 132