Polycom VVX 150 Manual page 83

Related Topics
Alcatel-Lucent Shared Call Appearance
Make an Active SCAP Call Public
By default, all active calls on the shared line are private. After a call is answered, you can make the call
public and enable other SCAP members to bridge in to the active call.
Procedure
•
During an active call, select Share.
The call is now public, the Private soft key is displayed, and other group members can bridge
into the call.
Related Topics
Alcatel-Lucent Shared Call Appearance
Make an Active SCAP Call Private
After you make a call public and allow group members to bridge in to the call, you can make the call
private to prevent more group members from bridging in to the call.
Procedure
•
During an active bridge call, select Private.
The call is now private and other group members cannot bridge in to the call.
Related Topics
Alcatel-Lucent Shared Call Appearance
Holding or Passing SCAP Calls
You can choose to hold or pass a call on the shared SCAP line. When you place a call on hold, the call
is held on your phone. You are the only one that can view the held status of the call and resume the
call.
Passing a call enables other group members to resume the call on the shared line.
Printed from Polycom, Inc. (http://documents.polycom.com) #{renderLang "en" MsgPDFPage} 83