Disable The Screen Saver; Use Your Phone As A Digital Picture Frame - Polycom VVX 150 Manual

Note If your phone doesn't detect the USB device when you insert it into the USB port,
the USB port on your phone may be disabled. Contact your system administrator
for assistance using the USB port.
Related Topics
Screen Savers

Disable the Screen Saver

You can stop a screen saver at any time by touching the screen. After your phone is idle for the
specified period of time, the screen saver starts again.
You can disable a screen saver—prevent it from starting, even if your phone has been idle for the
specified period of time—by doing the following:
•
Disabling the Screen Saver setting. When you disable the setting, the screen saver does not
display, even though the USB flash drive is still attached.
•
Removing the USB flash drive. The screen saver does not display until you attach the USB flash
drive again and your phone is idle for the period of time you specified.
Procedure
1 Go to Settings > Basic > Preferences.
2 Select Screen Saver > Screen Saver then select Disabled.
3 Select Save.
Related Topics
Screen Savers

Use Your Phone as a Digital Picture Frame

You can use the picture frame feature on your phone to view pictures stored on your USB flash drive at
any time without setting up a screen saver. You can display your pictures as thumbnails, as a slide
show, or a single picture.
Before you can display your pictures, confirm that your pictures are on the USB flash drive and that the
USB flash drive is attached to your phone.
If your phone does not detect the USB flash drive when you attach it to your phone, the
Note
USB port on your phone may be disabled. Contact your system administrator.
Printed from Polycom, Inc. (http://documents.polycom.com) #{renderLang "en" MsgPDFPage} 162