Adjusting The Sweeping Area; Storage; Sweeping Mode; Symbols On The Display During Sweeping - Kärcher MC 250 Implements Manual

2 Check the front brush and sweeping brush for tangled
cords and straps and remove as necessary.
3 Keep the hydraulic connections clean and check for
leaks once a week.
4 Check the front brush and sweeping brush for wear and
tear and replace if necessary.

1.4.9 Adjusting the sweeping area

1. Adjust the sweeping area as shown in the illustration.
Right: 9 am- 2 pm
Right-hand side: 10 am- 3 pm
Adjusting the side inclination
Screw 1
1
Screw 2
2
2. Unscrew the screws.
3. Adjust the side inclination via the rotation point of screw
1.
4. Tighten the screws.
Adjusting the head inclination forwards
Lock nut
1
Hexagon
2
5. Unscrew the counternut.
6. Adjusting the head inclination via the hexagon.
7. Tighten the counternut.
Adjusting the brush contact pressure
8. The brush system has a hydraulic brush contact pres-
sure adjustment system.

1.4.10Storage

WARNING
Risk of injury and damage
Note the weight of the device.
ATTENTION
Risk of damage
Store the attachment kit in a protected, level and dry place.
Ensure that the sweeping brushes are not loaded.
1. Remove the sweeping system from the vehicle, then re-
move the sweeping brushes and store the sweeping
system on the pallet.
2. Ensure that the sweeping brushes are not loaded during
attachment to the vehicle.
1.5

Sweeping mode

1.5.1 Symbols on the display during sweeping

The following symbols and warning indicators are also
shown on the display during sweeping.
Suction mouth is down (lowered)
Suction mouth camera activated
The waste container is raised

1.5.2 Fill the fresh water tank / recycling water tank

Left side panel
1
Filler neck with cover
2
Fresh water tank cap
3
Manual suction hose flap/overflow protection
4
Note
The open flap of the manual suction hose provides over-
flow protection when filling
1. Swing the left side panel outwards.
2. Remove the cover from the filler neck and attach a suit-
able water supply hose.
3. Unscrew the fresh water tank cap.
4. -Open the manual suction hose flap
English 31